Light Keeper Pro Shunts Circuit Once Unplugged Again

FAQs

What is a LED?

LED is brusk for Light Emitting Diode which is a pocket-sized semi-conductor that illuminates when voltage is applied in the intended direction. They can be found in many of our personal electronics. They are known to exist more energy efficient and last about 30,000 hours on average.

Is the battery included with the LED Keeper?

Yes, a 9V battery required to power the LED Keeper is included.

Where is the battery located?

The 9V battery is located on the underside of the LED Keeper nearly the power string. The battery needs to be attached to the bombardment connector within the battery compartment accordingly.

Where tin I buy a replacement battery for my LED Keeper?

A replacement battery is available at well-nigh Stores selling batteries. One 9V battery is all y'all need.

How practise I know if my LED Keeper is functional?

The LED Keeper has a cerise light on the meridian of the tool that volition illuminate when the trigger is pulled. This will let the user know that their LED Keeper is powered.

What practice I practise if neither side of the light gear up illuminates while making contact with the LED Keeper?

Re-hook and try again. If notwithstanding no illumination, unhook your LED Keeper from the low-cal set up wire and choose another location inside the unlit section to re-hook and try again.

If still unsuccessful, your light set may accept multiple faults acquired by rust or other bug. This may be preventing the LED Keeper from being able to create the mini-circuit necessary in order to illuminate a section. Technical Support is available to assist at 888-858-2548.

Will the LED Keeper harm a calorie-free set?

No. Although the LED Keeper uses insulation piercing applied science in order to tap into the LED low-cal set and illuminate functional sections, the material used to manufacture the insulation has the tendency to "heal" itself. The miniature puncture left behind might not even exist visible since it is so tiny.

What happens if I connect the LED Keeper to the wrong wire?

Connecting the LED Keeper to the wrong wire on the calorie-free set will not cause any impairment to the calorie-free set, tool, or the user. The LED Keeper volition simply not be able to illuminate functional sections or benefit the user if the wrong wire is tapped into.

Will the LED Keeper piece of work on incandescent lite sets?

No, the LED Keeper uses a different technology specifically developed to perform on LEDs. Fortunately, the LightKeeper Pro is able to fix incandescent holiday lights and has the required technology for these sets. Please see world wide web.LightKeeperPro.com for more than information.

Why would I employ a POD?

The user would employ a POD if they are experiencing a socket outcome that cannot be solved, if the precise replacement seedling for the set cannot be located, or if the user has a not-replaceable (sealed construction) LED light set.

Will the PODs work on incandescent light sets?

The PODs were also designed to repair LEDs but. If 1 were to utilise a POD on an incandescent prepare, the set would not illuminate and remain dysfunctional.

Are the PODs supposed to illuminate like an bodily light seedling?

The PODs will not illuminate. It does not hateful that they are dysfunctional. They simply were non designed to do so. The POD is necessary for the repair of the LED set in order to maintain the electrical remainder. Since the user did remove a LED from the set, more voltage is existence forced upon the remaining functional bulbs.

Does it matter if I accept replaceable or not-replaceable lite sets for the LED Keeper to work?

The LED Keeper volition work on both replaceable and not-replaceable sets along with the LED Keeper PODs.

Why does the LED Keeper'due south Bulb Tester but work if I insert the bulb a specific mode?

This does not mean that the Bulb Tester does not piece of work. This is a straight event of the physics behind the LED lite sets and their manufacturing. A LED will only deport electricity in i direction and illuminate if powered properly. Therefore, it may require two attempts to test the LED in the LED Seedling Tester.

Will the Seedling Tester exam all LED bulbs?

The LED Keeper's Bulb Tester is designed to test the majority of designs available. However, the Bulb Tester may not be able to accommodate all designs.

Will the Bulb Tester test incandescent bulbs?

No. The LED Bulb Tester does not have the technological design to practice so. It will only role for LEDs.

How does the Fuse Tester work?

The user only places the fuse in question upon the Fuse Tester. It is necessary to place the metallic ends of the fuse upon the metal contacts of the Fuse Tester to receive an authentic reading. At that place is no need to pull the trigger. If the fuse is skillful, the cerise low-cal upon the LED Keeper will illuminate. If the fuse is bad and not usable, the red light will non illuminate.

What do I do if the tool is no longer able to illuminate functional sections of a light prepare?

If you were once able to illuminate functional sections of the light set using your LED Keeper and it no longer does so, the Pivot inside the LED Keeper hook may need to exist flipped. Simple instructions on how to flip the Pin tin can be found hither.

Does the Universal Replacement POD have multiple uses?

No, this POD is designed to supercede lamp sockets only.

To purchase a new Pivot, click here

sullivanmajessis.blogspot.com

Source: https://www.ledkeeper.com/faqs/